>
Removal |
1. |
Disconnect the fuel filler hose (A) and the leveling hose (B). |
2. |
Disconnect the vapor hose quick-connector (A) after removing the trunk luggage trim. |
3. |
Remove the rear-LH wheel, tire, and the inner wheel house. |
4. |
Remove the filler-neck assembly from the vehicle after
removing the vapor hose mounting bolts (A) and the bracket mounting nuts
(B). |
Installation |
1. |
Install in the reverse order of removal.
|
Engine Start/Stop Button position
OFF
To turn off the engine, press the Engine Start/Stop Button with the Engine Start/Stop
Button in the ON position and the shift lever in P(Park). When you press the Engine
Start/Stop Button wit ...
Recommended SAE viscosity number
CAUTION
Always be sure to clean the area around any filler plug, drain plug, or dipstick
before checking or draining any lubricant. This is especially important in dusty
or sandy areas and when t ...
Operation of the parking assist system
Operating condition
This system activates when the parking assist button is pressed with the
Engine Start/Stop Button ON.
The parking assist button turns on automatically and activates the ...