Hyundai Equus: Fuel Sender Assembly Repair procedures
Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Engine Control/Fuel System / Fuel Delivery System / Fuel Sender Assembly Repair procedures
Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Engine Control/Fuel System / Fuel Delivery System / Fuel Sender Assembly Repair procedures
| Removal |
| 1. |
Turn the ignition switch OFF and disconnect the battery negative (-) cable. |
| 2. |
"Release the residual pressure in fuel line.
(Refer to Fuel Delivery System -""Release Residual Pressure in Fuel Line"")" |
| 3. |
Remove the fuel pump.
(Refer to Fuel Delivery System - "Fuel Pump") |
| 4. |
Disconnect the fuel pump & sender ground (A).
|
| 5. |
Disconnect the fuel pump connector & fuel sender connector (A). |
| 6. |
Lift the fixing hook (B) by using a common driver, and then remove the fuel sender (C).
|
| Installation |
| 1. |
Install in the reverse order of removal. |
Fuel Pump Motor Repair procedures
Removal
1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
"Release the residual pressure in fuel line.
(Refer to Fuel Delivery System -""Release Residual Pres ...
Over Pressure Valve (OPV) Repair procedures
Removal
1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
Release the residual pressure in fuel line.
(Refer to Fuel Delivery System -"Release Residual Pressu ...
See also:
Smart Cruise Control Unit Schematic Diagrams
Circuit Diagram
...
Pre-active Seat Belt (PSB) Schematic Diagrams
Circuit Diagram
...
Automatic transmission fluid
Automatic transmission fluid should not be checked under normal usage conditions.
But in severe conditions, the fluid should be changed at an authorized EQUUS
dealer in accordance to the scheduled ...
Categories
Hyundai Equus Manuals
© 2011-2024 Copyright www.heqmanual.com