>
Removal |
1. |
Turn the ignition switch OFF and disconnect the battery negative (-) cable. |
2. |
"Release the residual pressure in fuel line.
(Refer to Fuel Delivery System -""Release Residual Pressure in Fuel Line"")" |
3. |
Remove the fuel pump.
(Refer to Fuel Delivery System - "Fuel Pump") |
4. |
Remove the sub fuel sender.
(Refer to Fuel Delivery System - "Sub Fuel Sender") |
5. |
Disconnect the suction hose (A). |
6. |
Remove the head assembly (C ) after removing the fixing hook (B). |
7. |
Disconnect the dual hose (A). |
8. |
Release the fixing hook, and then remove the free filter (A) and fuel pump motor (B). |
Installation |
1. |
Install in the reverse order of removal. |
Purge Control Solenoid Valve (PCSV) Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the PCSV connector.
3.
Measure resistance between the PCSV terminals 1 and 2.
4.
Check that the resistance is within the speci ...
Suspension mounting bolts
Check the suspension connections for looseness or damage. Retighten to the specified
torque. ...
Specifications
Specifications
ItemsSpecificationsRated voltage5VLoadMax. 1mA (Relay load)Detection illuminationsTail lampON : 74 ± 16 (Lux), 2.36 ± 0.08 (V)OFF : 148 ± 32 (Lux), 4.52 ± 0.1 (V)Head lampON : 18.5 ...