>

Hyundai Equus: Sub Fuel Sender Repair procedures - Fuel Delivery System - Engine Control/Fuel System - Hyundai Equus VI 2009-2024 Service ManualHyundai Equus: Sub Fuel Sender Repair procedures

Removal
1.
Release the residual pressure in fuel line.
(Refer to Fuel Delivery System - "Release Residual Pressure in Fuel Line")
2.
Folding the rear seat cushion.
3.
Remove the fuel pump service cover (A) after loosening the screws.

4.
Disconnect the sub fuel sender connector (A).
5.
Remove the sub fuel sender (B) from the fuel tank after removing mounting bolts.

Installation
1.
Install in the reverse order of removal.

Sub fuel sender installation bolt :
2.0 ~ 2.9 N.m (0.2 ~ 0.3 kgf.m, 1.4 ~ 2.2 lbf.ft)

   
When installing the sub fuel sender, be careful not to get the seal-ring entangled.
    Fuel Pump Repair procedures
    Removal 1. Release the residual pressure in fuel line. (Refer to Fuel Delivery System - "Release Residual Pressure in Fuel Line") 2. Folding the rear seat cushion. 3. Remove the fuel pump ...

    Fuel Filter Repair procedures
    Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Release the residual pressure in fuel line. (Refer to Fuel Delivery System -"Release Residual Pressu ...

    See also:

    A/C Pressure Transducer Repair procedures
    Inspection 1. Measure the pressure of high pressure line by measuring voltage output between terminal “1” and “2”. 2. Inspect the voltage value whether it is sufficient to be regular value or ...

    Rain Sensor Schematic Diagrams
    Circuit Diagram ...

    Gauges
    Speedometer The speedometer indicates the speed of the vehicle and is calibrated in miles per hour (mph) and/or kilometers per hour (km/h). ✽ NOTICE On the "User Settings Mode" ...

    Categories

    Hyundai Equus Manuals


    © 2011-2024 Copyright www.heqmanual.com