>

Hyundai Equus: Fuel Pressure Control Valve Repair procedures - Engine Control System - Engine Control/Fuel System - Hyundai Equus VI 2009-2024 Service ManualHyundai Equus: Fuel Pressure Control Valve Repair procedures

Inspection
1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
Disconnect the fuel pressure regulator valve connector.
3.
Measure resistance between the fuel pressure regulator valve terminals 1 and 2.
4.
Check that the resistance is within the specification.

Specification: Refer to “Specification”

    Fuel Pressure Control Valve Schematic Diagrams
    Circuit Diagram ...

    Canister Close Valve (CCV) Description and Operation
    Description Canister Close Valve (CCV) is normally open and is installed on the canister ventilation line. It seals evaporative emission control system by shutting the canister from the atmosph ...

    See also:

    Instrument panel overview
    1. Instrument cluster 2. Lighting control lever 3. Wiper and washer control lever 4. Horn 5. Driver’s front air bag 6. Engine Start/Stop Button 7. Hazard warning flasher 8. Climate control sy ...

    Damper Clutch Control Solenoid Valve Description and Operation
    Description Damper Clutch control solenoid valve is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the Damper Clutch. ...

    Snow tires
    If you equip your car with snow tires, they should be the same size and have the same load capacity as the original tires. Snow tires should be installed on all four wheels; otherwise, poor handli ...

    Categories

    Hyundai Equus Manuals


    © 2011-2024 Copyright www.heqmanual.com