The smart cruise control unit is installed on the front
center of the chassis. A radar sensor is embedded in the front section
of the unit. This sensor detects vehicles and objects in front of the
vehicle.The radar sensor can detect up to 64 objects ahead of a vehicle.
The alarm goes off when the vehicle deviates from the horizontal and
vertical alignment reference points during operation. This sensor
communicates with the dashboard, warning buzzer, smart cruise control
switch, Electronic Stability Program (ESP), ECM, and TCM via CAN
communication.The sensor controls vehicle speed through CAN
communication between the Electronic Stability Program (ESP) system and
the ECM and TCM.
Description
The smart cruise control system allows a driver to program
the vehicle to control the speed and following distance detecting the
vehicle ahead without depressing the brake pedal and ...
Specification
ItemSpecificationPower supply(V)12Operation voltage (V)9 ~ 16
...
See also:
Rolling code programming
Rolling code devices which are "code-protected" and manufactured after 1996 may
be determined by the following:
Reference the device owner's manual for verification.
The handheld ...
Front Wiper Motor Repair procedures
Removal
1.
Remove the windshield wiper arm (A) and blade after removing a nut.
Tightening torque :
27 ~ 31 N.m (2.8 ~ 3.2 kgf.m, 20 ~ 23 lb-ft)
2.
If necessary of removing the wiper blad ...
Lighting control
The light switch has a Headlight and a Parking light position.
To operate the lights, turn the knob at the end of the control lever to one of
the following positions:
(1) OFF position
(2) Aut ...