>
If the Smart Key is not working properly, try replacing the battery with a new one.
Battery Replacement of Conventional Smart Key
Battery Type: CR2032 To Replace the Battery:
1. Pry open the rear cover of the Smart Key.
2. Remove the old battery and insert the new battery. Make sure the battery position
is correct.
3. Reinstall the rear cover of the Smart Key.
Battery Replacement of Card Type Smart Key
Battery Type: CR2412 To Replace the Battery:
1. Pull out the battery and battery cover.
2. Remove the old battery and insert the new battery. Make sure the battery position
is correct.
3. Reinstall the battery cover and battery.
✽ NOTICE
Components and Components Location
Components Location
1. ECM (Engine Control Module) 2. Manifold Absolute Pressure Sensor (MAPS)3. Intake Air Temperature Sensor (IATS) 4. Engine Coolant Temperature Sensor (ECTS) 5. Throttle ...
Power Windows
The Engine Start/Stop Button must be in the ON position to be able to raise or
lower the windows.
Each door has a Power Window switch to control that door's window. The driver
has a Power Win ...
Smart Cruise Control Switch Components and Components Location
Components
1. SET - switch2. RES + switch3. SCC switch4. CANCEL switch5. CRUISE switch
...