>
Inspection |
[Measuring Resistance] |
1. |
Disconnect the cruise control switch connector from the control switch. |
2. |
Measure resistance between terminals on the control switch when each function switch is ON (switch is depressed).
|
3. |
If not within specification, replace switch. |
[Measuring Voltage] |
1. |
Connect the cruise control switch connector to the control switch. |
2. |
Measure voltage between terminals on the harness side connector when each function switch is ON (switch is depressed).
|
3. |
If not within specification, inspect the control switch resistance.
The measuring resistance value is not within specification, replace the switch and measure the voltage again. |
4. |
If resistance is OK but, measuring voltage is not within
specification, inspect the wiring harness and connectors between the
switch and the ECM. |
Removal |
1. |
Turn ignition switch OFF and disconnect the negative (-) battery cable. |
2. |
Remove the air-bag module from the steering wheel.
(Refer to Restraint - "Driver Airbag (DAB) Module and Clock Spring") |
3. |
Remove the bejel (A) after loosening the screw. |
4. |
Remove the cruise control switch mounting screws (A). |
5. |
Disconnect the under cruise control switch (B). |
6. |
Remove the cruise control switch (A). |
Installation |
1. |
Install in the reverse order of removal. |
Recommended cold tire inflation pressures
All tire pressures (including the spare) should be checked when the tires are
cold. “Cold Tires” means the vehicle has not been driven for at least three hours
or driven less than one mile (1.6 km ...
Damper Clutch Control Solenoid Valve Description and Operation
Description
Damper Clutch control solenoid valve is attached to the valve
body. This variable force solenoid valve directly controls the
hydraulic pressure inside the Damper Clutch. ...
For best battery service
The battery is in the trunk.
Keep the battery securely mounted.
Keep the battery top clean and dry.
Keep the terminals and connections clean, tight, and coated with petroleum
jelly or t ...