>
When leaving keys with parking lot and valet attendants, the following procedures will ensure your vehicle’s trunk and glove box compartment can only be opened with the mechanical key.
To lock:
1. Remove the mechanical key from the Smart Key.
2. Unlock the glove box by using the mechanical key, then open it.
3. Set the Trunk Lid Control button to the OFF position (not depressed).
4. Close and lock the glove box using the mechanical key.
5. Leave the Smart Key with the attendant and keep the mechanical key with you.
The Smart Key can only be used to start the engine and operate door locks.
To release:
1. Open the glove box with the mechanical key.
2. Set the Trunk Lid Control button to the ON position (depressed).
In this position the trunk lid will open with the Trunk Lid button or the Smart Key.
Repair procedures
Removal
1.
Remove the front bumper cover.
(Refer to Body - "Front Bumper Cover")
2.
Remove the bolts and disconnect the horn connectors, then remove the high pitch horn (A) and low pitch horn ...
Components and Components Location
Component Location
1. Power seat memory unit (Driver)2. Memory power seat control switch (Driver)3. Passenger power seat control switch4. Outside mirror cintrol switch (Built in DDM)5. Rear right ...
Head Lamps Components and Components Location
Components
1. Head lamp assembly lens & housing2. Ballast3. Head lamp (Low) bulb (HID) & Ignitor4. Bracket5. Dust cover (Low)6. Vertical adjustment (High/Low)7. Head lamp (High) bulb8. Du ...