>
The immobilizer system protects your vehicle from theft. If an improperly coded key (or other device) is used, the engine’s fuel system is disabled.
When the Engine Start/Stop Button is in the ON position, the Immobilizer System indicator should come on briefly, then go off. If the indicator starts to blink, the system does not recognize the coding of the Smart Key.
Press the Engine Start/Stop Button to the OFF position, then press the Engine Start/Stop Button to the ON position again.
The system may not recognize your Smart Key’s coding if another immobilizer key or other metal object (i.e., key chain) is near the Smart Key.The engine may not start because the metal may interrupt the transponder signal from transmitting normally.
If the system repeatedly does not recognize the coding of the Smart Key, contact your EQUUS dealer.
Do not attempt to alter this system or add other devices to it. Electrical problems could result that may make your vehicle inoperable.
✽ NOTICE
ALWAYS take the Smart Key with you when you leave the vehicle.
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that
may cause undesired operation.
✽ NOTICE
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the device.
Fuel Pressure Sensor (FPS) Schematic Diagrams
Circuit Diagram
...
General Information
General Troubleshooting Information
Before Troubleshooting
1.
Check applicable fuses in the appropriate fuse/relay box.
2.
Using the battery checker (MCR-570 KIT), check the battery for damag ...
Advanced vehicle safety management (AVSM) (If equipped)
AVSM detects the distance from the vehicle ahead with the sensor, to warn you
before collision and protect you in certain hazardous situations by using warning
message, warning sound and seat belt ...