>
Hyundai Equus Manuals

Hyundai Equus: Description and Operation - Charging System - Engine Electrical System - Hyundai Equus VI 2009-2024 Service ManualHyundai Equus: Description and Operation

Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Engine Electrical System / Charging System / Description and Operation

Description
The charging system included a battery, an alternator with a built-in regulator, and the charging indicator light and wire.
The Alternator has eight built-in diodes, each rectifying AC current to DC current.
Therefore, DC current appears at alternator "B" terminal.
In addition, the charging voltage of this alternator is regulated by the battery voltage detection system.
The alternator is regulated by the battery voltage detection system. The main components of the alternator are the rotor, stator, rectifier, capacitor brushes, bearings and V-ribbed belt pulley. The brush holder contains a built-in electronic voltage regulator.
Alternator Management System
Alternator management system controls the charging voltage set point in order to improve fuel economy, manage alternator load under various operating conditions, keep the battery charged, and protect the battery from over-charging. ECM controls generating voltage by duty cycle (charging control, discharging control, normal control) based on the battery conditions and vehicle operating conditions.
The system conducts discharging control when accelerating a vehicle. Vehicle reduces an alternator load and consumes an electric power form a battery.
The system conducts charging control when decelerating a vehicle. Vehicle increases an alternator load and charges a battery.
    Charging System
    ...

    Repair procedures
    On-vehicle Inpection     • First of all, check for DTCs. If a DTC is present, perform troubleshooting in accordance with the procedure for that DTC. (Refer to DTC guide) ...

    See also:

    Heated Oxygen Sensor (HO2S) Description and Operation
    Description Heated Oxygen Sensor (HO2S) consists of zirconium and alumina and is installed both upstream and downstream of the Manifold Catalytic Converter. The sensor output voltage varies in ...

    Advanced smart cruise control system (If equipped)
    (1) CRUISE indicator (2) SET indicator (3) Set speed (4) Vehicle-to-vehicle distance The smart cruise control system allows you to program the vehicle to maintain a set speed so long as it is ...

    Smart Cruise Control Unit Description and Operation
    Description The smart cruise control unit is installed on the front center of the chassis. A radar sensor is embedded in the front section of the unit. This sensor detects vehicles and objects ...

    Categories

    Hyundai Equus Manuals


    © 2011-2024 Copyright www.heqmanual.com