>
Hyundai Equus Manuals

Hyundai Equus: Ignition Coil Repair procedures - Ignition System - Engine Electrical System - Hyundai Equus VI 2009-2024 Service ManualHyundai Equus: Ignition Coil Repair procedures

Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Engine Electrical System / Ignition System / Ignition Coil Repair procedures

Removal
1.
Disconnect the battery nagative terminal.
2.
Remove the engine cover.
3.
Disconnect the LH/RH ignition coil connectors (A).

4.
Remove the LH/RH ignition coil (A).

   
•
When removing the ignition coil connector, pull the lock pin (A) and push the clip (B).

Installation
1.
Install in the reverse order of removal.
Ignition coil installation bolts:
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 Ib-ft)
Inspection
1.
Measure the primary coil resistance between terminals (+) and (-).

Standard value: 0.62x ± 10%
    Ignition Coil Schematic Diagrams
    Circuit Diagram ...

    Spark Plug Description and Operation
    Description A spark plug is a device for delivering electric current from an ignition system to the combustion chamber of a spark-ignition engine to ignite the compressed fuel/air mixture there ...

    See also:

    G Sensor Repair procedures
    Removal     • be careful to avoid excessive external shock. • connectors to avoid damage to the connector pins. G-sensor FL 1. Remove the front bumper. (Refer to ...

    Front Seat Shield Outer Cover Repair procedures
    Replacement [Front Seat Front Shield Outer Cover]     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it ...

    Specifications
    Specifications Smart Key Unit ItemsSpecificationRated voltageDC 12VOperating voltageDC 9 ~ 16VOperating temperature-22°F ~ 167°F (-30°C ~ 75°C)LoadMax. 2.5 mA (When welcome function 3.7 mA) RF ...

    Categories

    Hyundai Equus Manuals


    © 2011-2024 Copyright www.heqmanual.com