>

Hyundai Equus: Ignition Coil Description and Operation - Ignition System - Engine Electrical System - Hyundai Equus VI 2009-2024 Service ManualHyundai Equus: Ignition Coil Description and Operation

Description
An ignition coil is an induction coil in an engine's ignition system which transforms the battery's low voltage to the high voltage needed to create an electric spark in the spark plugs to ignite the fuel. Coils have an internal resistor while others rely on a resistor wire or an external resistor to limit the current flowing into the coil from the battery 12 V supply.
    Repair procedures
    On-vehicle Inspection Inspect ignition coil assembly and Perform spark test 1. Check for DTCs.     • If a DTC is present, perform troubleshooting in accordance with the pr ...

    Ignition Coil Specifications
    Specification ItemSpecification Primary Coil Resistance (x)0.62 ± 10% [20°C (68°F)]Secondary Coil Resistance (kx)7.0 ± 15% [20°C (68°F)] ...

    See also:

    Front Strut Assembly Repair procedures
    Removal 1. Remove the front wheel and tire (A) from front hub . Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)     • Be careful not to damage ...

    Locking
    To lock : 1. Close all doors, engine hood and trunk. 2. Either press the door handle button or press the Door Lock button on the Smart Key. 3. The hazard warning lights will blink and the chime ...

    Air Spring Description and Operation
    Description Because of the design layout, the air spring and the shock absorber (damper) is separated. The average (target) pressure of rear air spring for normal operation is around 8.5 bar. ...

    Categories

    Hyundai Equus Manuals


    © 2011-2024 Copyright www.heqmanual.com