Hyundai Equus: Engine Electrical System

Muffler Repair procedures

Removal 1. Disconnect the rear oxygen sensor (HO2S) connector (A) on LH and RH side. 2. Remove the front muffler (A) on LH and RH side. Tightening torque : 39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m ...

General Information

...

See also:

Propeller Shaft Repair procedures
Inspection CV Joint and Boots 1. Shift the transaxle to Neutral. 2. Raise the vehicle off the ground, and support it with safety stands in the proper locations. 3. Check the center beari ...

Fuel requirements
Your new vehicle is designed to obtain maximum performance with UNLEADED FUEL, as well as minimize exhaust emissions and spark plug fouling. Your new vehicle is designed to use only unleaded fuel h ...

Front LCD monitor Repair procedures
Removal     Take care not to scratch the crash pad and related parts. 1. Disconnect the negative (-) battery terminal. 2. Remove the center fascia upper panel. (Refer to ...