Hyundai Equus: Muffler Components and Components Location

Exhaust Manifold Repair procedures

Removal and Installation 1. Disconnect the negative terminal (A) from the battery. Tightening torque : 3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft) 2. Remove the engine room cover (A ...

Muffler Repair procedures

Removal 1. Disconnect the rear oxygen sensor (HO2S) connector (A) on LH and RH side. 2. Remove the front muffler (A) on LH and RH side. Tightening torque : 39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m ...

See also:

Storing Position into Memory
1. Check that the shift lever is in P (Park) and the Engine Start/Stop Button is in the ON position. 2. Adjust the driver’s seat, outside rearview mirrors, steering wheel and HUD (Head-Up Display ...

Purge Control Solenoid Valve (PCSV) Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the PCSV connector. 3. Measure resistance between the PCSV terminals 1 and 2. 4. Check that the resistance is within the speci ...

Closing the Fuel Filler Lid
1. To install the fuel tank cap, turn it clockwise until it clicks one time. 2. Close the Fuel Filler Lid until it is latched securely. If the Malfunction Indicator Light ( ) comes ON, turn the eng ...