>
Removal and Installation |
1. |
Disconnect the negative terminal (A) from the battery.
|
2. |
Remove the engine room cover (A), engine cover (B) and radiator grill upper cover (C). |
3. |
Remove the air cleaner assembly.
|
4. |
Remove the oil level gauge (A).
|
5. |
Disconnect the LH/RH oxygen sensor (HO2S) connectors (A) and remove the connector from the bracket. |
6. |
Remove the exhaust manifold stay (A) and then disconnect the front muffler (B) on LH and RH side.
|
7. |
Remove the LH/RH exhaust manifold heat protectors (A).
[RH]
[LH]
|
8. |
Remove the LH/RH exhaust manifolds (A).
[RH]
[LH]
|
9. |
Remove the LH/RH exhaust manifold gaskets.
|
10. |
Installation is reverse order of removal.
[LH]
[RH]
|
Front Air Strut Assembly Troubleshooting
Variable damper (CDC) failure criterion
ConditionsPhenomenaMaintenance considerationsMechanical conditionsLeaking oilAn oil leak indicates that the part has failed and must be replaced.Inner seam ...
Specifications
Specifications
Fuel Delivery System
ItemsSpecificationFuel TankCapacity77 lit. (87.4 U.S.gal., 81.4 U.S.qt., 67.8 Imp.qt.)Fuel FilterTypePaper typeFuel PressureLow Pressure Fuel Line343.2 ~ 59 ...
Trunk Lid Trim Repair procedures
Replacement
•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply prote ...