>
Removal |
1. |
Remove the sub frame.
(Refer to SS group) |
2. |
Drain engine oil.
|
3. |
Remove the oil filter & cooler assembly (A). |
4. |
Remove the lower oil pan(A).
Insert the blade of SST (09215-3C000) between the upper oil
pan and the lower oil pan. Cut off applied sealer and remove the lower
oil pan.
|
5. |
Remove the upper oil pan (A).
Insert the blade of SST (09215-3C000) between the upper oil
pan and the cylinder block. Cut off applied sealer and remove upper oil
pan.
|
6. |
Seperate the sprocket (A) and the chain (B) from the oil pump after remove the sprocket bolt. |
7. |
Remove the oil pump assembly (A). |
Installation |
1. |
Install the oil pump assembly (A).
|
2. |
Install the oil pump sprocket (A) with the chain (B) to the oil pump.
|
3. |
Install the upper oil pan.
|
4. |
Install the lower oil pan (A).
|
5. |
Install the oil filter & cooler assembly (A).
|
6. |
Install the sub frame.
(Refer to SS group) |
7. |
Refill with the engine oil. |
Intake Actuator Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the intake actuator connector.
3.
Verify that the intake actuator operates to the fresh position when connecting 12V to terminal 3 ...
Sedan Front Body
Front body A
Roof panel front cornerFront pillar outer cornerHood hinge mounting hole (O13)Shockabsorber mounting hole (O24)Front end module mounting hole (O9)Cowl top cover mounting hole (O7)
F ...
Special Service Tools
Special Service Tools
Tool (Number and name)IllustrationUseCrankshaft front oil seal installer(09231-2J310)(09231-H1100)Installation of the front oil sealRing gear stopper(09231-2B100)(09231-3N10 ...