>
If the Smart Key does not operate normally, you can lock or unlock the door by using the mechanical key.
Mechanical Key of Conventional Smart Key
Depress and hold the release button (1) and remove the mechanical key (2). Insert the mechanical key in to the key hole on the door.
To reinstall the mechanical key, put the key into the hole and push it until a click sound is heard.
Mechanical Key of Card Type Smart Key
Push and hold the release lever (1) and remove the mechanical key (2). Insert the mechanical key in to the key hole on the door.
To reinstall the mechanical key, push and hold the release lever (1) and put the key into the hole and push it until a click sound is heard.
SRS components and functions
The SRS consists of the following components:
1. Driver's front air bag module
2. Passenger's front air bag module
3. Side impact air bag modules
4. Curtain air bag modules
5. Retract ...
Side Impact Sensor (SIS) Description and Operation
Description
The Side Impact Sensor (SIS) system consists of two kinds of
side impact sensor which are installed at each center of the front door
module (left and right) and two rear sensors whi ...
Immobilizer system
The immobilizer system protects your vehicle from theft. If an improperly coded
key (or other device) is used, the engine’s fuel system is disabled.
When the Engine Start/Stop Button is in the ON p ...