>
Removal and Installation |
1. |
Disconnect the negative terminal (A) from the battery.
|
2. |
Remove the air duct, air intak hose and the air cleaner assembly.
(Refer to Engine and transaxle assembly in this group) |
3. |
Loosen the drain plug (A) and drain the engine coolant. Remove the radiator cap (B) to speed draining.
|
4. |
Remove the throttle body. |
5. |
Remove the engine coolant temperature control assembly (A).
|
6. |
Remove the O-ring (A).
|
7. |
Installation is reverse order of removal. |
Trunk Lid Trim Components and Components Location
Component Location
1. Trunk lid trim
...
Components and Components Location
Component Location
1. Start Stop Button(SSB)2. FOB key3. Trunk open switch4. RF receiver5. Interior antenna 16. Interior antenna 27. Interior antenna 38. Trunk antenna9. Door handle & do ...
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that
may c ...