>
Removal and Installation |
Water Pump |
1. |
Disconnect the negative terminal (A) from the battery.
|
2. |
Remove the air duct, air intake hose and the air cleaner assembly.
(Refer to Engine and transaxle assembly in this group) |
3. |
Loosen the drain plug (A) and drain the engine coolant. Remove the radiator cap (B) to speed draining.
|
4. |
Disconnect the radiator upper hose (A) and lower hose (B). |
5. |
Turn the tensioner (B) clockwise and loosen, then remove the drive belt (A). |
6. |
Remove the water pump pulley (A).
|
7. |
Remove the water pump (A).
|
8. |
Installation is reverse order of removal. |
1. |
Remove the intake manifold module.
(Refer to intake and exhaust system in this group) |
2. |
Remove the injector & rail assembly.
(Refer to FL group) |
3. |
Remove the water outlet pipe (A) and the water inlet pipe (B).
|
4. |
Installation is reverse order of removal. |
Smart Key Unit Components and Components Location
Components
Connector Pin Information
No.Connector AConnector BConnector C1V_BAT loadC_CAN LowSSB illumination ground2-C_CAN High-3Power ground1-SSB LED OFF4IGN1-Interior antenna #2 power5IGN1 rela ...
Description and Operation
Description
Premium AVN system
The premium AVN system has improved information search and
easiness of manipulation for the driver by simplifying the system
operation experience and unifying th ...
Accelerator Position Sensor (APS) Specifications
Specification
AcceleratorPositionOutput Voltage (V)APS1APS2C.T0.7 ~ 0.80.33 ~ 0.43W.O.T3.85 ~ 4.351.93 ~ 2.18
...