Hyundai Equus: Cylinder Head Components and Components Location
Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Engine Mechanical System / Cylinder Head Assembly / Cylinder Head Components and Components Location
Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Engine Mechanical System / Cylinder Head Assembly / Cylinder Head Components and Components Location
| Components |
| [RH] |
| 1. Cylinder head cover 2. Cylinder head cover oil seal 3. Cylinder head cover gasket 4. Exhaust CVVT assembly 5. Exhaust camshaft, RH 6. Intake CVVT assembly 7. Intake camshaft, RH 8. Cam to cam guide | 9. Camshaft thrust bearing cap 10. Camshaft bearing cap 11. Camshaft carrier 12. Timing chain tensioner 13. Roller finger follower 14. Hydraulic lash adjuster (HLA) assembly 15. Valve spring retainer 16. Valve spring retainer lock | 17. Valve spring 18. Valve stem seal 19. Valve 20. Cylinder head, RH 21. Cylinder head gasket, RH 22. Engine hanger 23. Fuel pump adapter |
| [LH] |
| 1. Cylinder head cover 2. Cylinder head cover oil seal 3. Cylinder head cover gasket 4. Exhaust CVVT assembly 5. Exhaust camshaft, LH 6. Intake CVVT assembly 7. Intake camshaft, LH 8. Cam to cam guide | 9. Camshaft thrust bearing cap 10. Camshaft bearing cap 11. Camshaft carrier 12. Timing chain tensioner 13. Roller finger follower 14. Hydraulic lash adjuster (HLA) assembly 15. Valve spring retainer 16. Valve spring retainer lock | 17. Valve spring 28. Valve stem seal 19. Valve 20. Cylinder head, LH 21. Cylinder head gasket, LH 22. Engine hanger 23. Fuel pump adapter |
Cylinder Head Repair procedures
Removal
•
Use fender covers to avoid damaging painted surfaces.
•
To avoid damaging the cylinder head, wait until the engine
coolant temperature drops below normal ...
See also:
Heater Control Unit Repair procedures
Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the cowl side trim.
(Refer to Body - "Cowl Side Trim")
3.
To remove the crash pad under cover [RH] (A), press both ...
Height Sensor Repair procedures
Removal
Height Sensor
1.
Disconnect the negative (-) battery terminal.
2.
Remove the height sensor linkage (A) installed on the front axle and rear axle.
(Number of height sensor : Air suspe ...
Wheel replacement
When replacing the metal wheels for any reason, make sure the new wheels are
equivalent to the original factory units in diameter, rim width and offset.
✽ NOTICE
The front tire size is diff ...
Categories
Hyundai Equus Manuals
© 2011-2024 Copyright www.heqmanual.com