>
1.Open the trunk.
2.Disconnect the negative battery cable.
3.Using a screwdriver, remove the trunk lid latch cover(1).
4.Using a screwdriver, remove the trunk lid switch(2), and disconnect the connector.
5.Detach the clip and fastener(3), then remove the trunk lid cover(4).
6.Remove the clips and screws.
7.Remove the trunk lid trim.
CAUTION
Be careful not to damage to the fasteners between the trunk lid trim and trunk lid.
8.Remove the nuts and disconnect the connectors.
9. Remove the bolts and remove the trunk key hold.
10. Remove the trunk lid panel.
CAUTION
Be careful not to damage to the fasteners between the trunk lid panel and trunk lid.
11. Remove the bolts and remove the license plate lamp.
12. Install a new light.
13. Installation is the reverse of removal.
8LR Brake Control Solenoid Valve Schematic Diagrams
Circuit Diagram
...
Cool and Warm Box Description and Operation
Description
Cool and warm box is a compartment where you can keep items cool or warm.
The sytem is a enviromentally friendly system that operates independently from the heater and A/C system.
...
Assist Handle Repair procedures
Replacement
•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply prote ...