>
A vehicle’s electrical system is protected from electrical overload damage by fuses.
This vehicle has 4 fuse panels, two located in the driver’s side and passenger’s side panel bolster, the other in the engine compartment.
If any of your vehicle’s lights, accessories, or controls do not work, check the appropriate circuit fuse. If a fuse has blown, the element inside the fuse will be melted.
If the electrical system does not work, first check the driver’s side fuse panel.
Before replacing a blown fuse, disconnect the negative battery cable.
Always replace a blown fuse with one of the same rating.
If the replacement fuse blows, this indicates an electrical problem. Avoid using the system involved and immediately consult an authorized EQUUS dealer.
Three kinds of fuses are used: blade type for lower amperage rating, cartridge type, and fusible link for higher amperage ratings.
WARNING - Fuse replacement
CAUTION
Do not use a screwdriver or any other metal object to remove fuses because it may cause a short circuit and damage the system.
✽ NOTICE
The actual fuse/relay panel label may differ from equipped items.
CAUTION
Steering Column Shroud Panel Repair procedures
Replacement
[Steering column shroud lower panel]
•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it w ...
Sedan Rear Body
Rear body
Roof panel rear cornerSide outer panel rear cornerRear parkage tray panel tooling hole(O23)Side outer panel rear cornerTooling hole (14X10)Tooling hole (O10)
...
Description and Operation
Description
The ECM (Electro Chromic inside rear view Mirror) is for
dimming the reflecting light from a vehicle behind at night, in order
the user not to be dazzled by the light. The front loo ...