>
To equalize tread wear, it is recommended that the tires be rotated every 7,500 miles (12,000 km) or sooner if irregular wear develops.
During rotation, check the tires for correct balance.
When rotating tires, check for uneven wear and damage. Abnormal wear is usually caused by incorrect tire pressure, improper wheel alignment, outof- balance wheels, severe braking or severe cornering. Look for bumps or bulges in the tread or side of tire.
Replace the tire if you find either of these conditions. Replace the tire if fabric or cord is visible. After rotation, be sure to bring the front and rear tire pressures to specification and check lug nut tightness.
Disc brake pads should be inspected for wear whenever tires are rotated.
✽ NOTICE
The front tire size is different from the rear tire size. So when you rotate tires, check the tire and wheel size.
WARNING
CVVT Oil Control Valve (OCV) Schematic Diagrams
Circuit Diagram
...
Warning Messages
Shift to "P" or "N" to start engine
This warning message illuminates if you try to start the engine with the
shift lever not in the P (Park) or N (Neutral) position.
...
Tire and loading information label
The label located on the driver's door sill gives the original tire size, cold
tire pressures recommended for your vehicle, the number of people that can be in
your vehicle and vehicle cap ...