>
Check the drive shafts, boots and clamps for cracks, deterioration, or damage. Replace any damaged parts and, if necessary, repack the grease.
Specifications
Specifications
Smart Key Unit
ItemsSpecificationRated voltageDC 12VOperating voltageDC 9 ~ 16VOperating temperature-22°F ~ 167°F (-30°C ~ 75°C)LoadMax. 2.5 mA (When welcome function 3.7 mA)
RF ...
Cylinder Head Repair procedures
Removal
•
Use fender covers to avoid damaging painted surfaces.
•
To avoid damaging the cylinder head, wait until the engine
coolant temperature drops below normal ...
Repair procedures
Inspection
System Parameterization
Parameterization of the system has to be performed to find
the amount of pulses needed to open the trunk. Due to tolerances not
every car is equal. Therefore ...