>
Check the pads for excessive wear, discs for run out and wear, and calipers for fluid leakage.
Seat Belt Pretensioner (BPT) Repair procedures
Removal
1.
Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
2.
Remove the safety belt (A) by turning it in the direction of arrow using a flat ...
Erasing HomeLink® buttons
Individual buttons cannot be erased. However, to erase all three programmed buttons:
1. Press and hold the two outer HomeLink® buttons until the indicator light begins
to flash-after 20 seconds.
2 ...
Intake Air Temperature Sensor (IATS) Schematic Diagrams
Circuit Diagram
...