Hyundai Equus: Operating conditions
The indicator on the switch will illuminate when the BSD (Blind spot detection) system switch is pressed with the Engine Start/Stop Button ON.
If vehicle speed exceeds 9.3 mph (15 km/h), the system will activate. If you press the switch again, the switch indicator and system will be turned off.
If the ignition switch is turned OFF and ON the system returns to the previous state.
When the system is not used, turn the system off by turning off the switch.
When the system is turned on, the warning light will illuminate for 3 seconds on the outside rearview mirror.
Blind spot detection system (BSD) (If equipped)
The BSD (Blind spot detection) system uses a radar sensor to alert the driver
while driving.
It senses the rear side territory of the vehicle and provides information to
the driver.
(1) BSD (B ...
Warning type
The system will activate when:
1.The system is on
2.Vehicle speed is above 9.3 mph (15 km/h)
3.Other vehicles are detected in the rear side
If a vehicle is detected within the boundary of the ...
See also:
If you have a flat tire while driving
If a tire goes flat while you are driving:
1.Take your foot off the accelerator pedal and let the car slow down while driving
straight ahead. Do not apply the brakes immediately or attempt to pull ...
Line Pressure Control Solenoid Vale Schematic Diagrams
Circuit Diagram
...
Auto Head lamp leveling Unit Schematic Diagrams
Circuit Diagram
...
Categories
Hyundai Equus Manuals
