>
The sensor detects distance to the vehicle ahead.
If the sensor is covered with dirt or other foreign matter, the vehicle to vehicle distance control may not operate correctly.
Always keep the sensor clean.
SCC (Smart cruise control) malfunction indicator
The warning message/ indicator illuminates when the vehicle to vehicle distance control system is not functioning normally.
Have the system checked by an authorized EQUUS dealer.
CAUTION
To convert to cruise control mode:
The driver may choose to only use the cruise control mode (speed control function) by doing as follows:
1.Turn the smart cruise control system on (the cruise indicator light will be
on but the system will not be activated).
2.Pull the distance to distance switch for more than 2 seconds.
3.Choose between "Smart cruise control(SCC) mode" and "Cruise control(CC) mode".
WARNING
When using the cruise control mode, you must manually access the distance to other vehicles as the system will not automatically brake to slow down for other vehicles.
Components and Components Location
Component Location
1. Windshield deicer relay (Built-in engine room junction box)2. Windshield deicer switch3. Windshield deicer4. Deicer connector5. Body control mudule
...
Gate operator & Canadian programming
During programming, your handheld transmitter may automatically stop transmitting.
Continue to press the Integrated HomeLink® Wireless Control System button (note
steps 2 through 3 in the Programm ...
Mode Control Actuator Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the mode control actuator connector.
3.
Verify that the mode control actuator operates to the defrost mode when connecting 12V to ...