>
1. Press the AUTO button.
The modes, fan speeds, air intake and air-conditioning will be controlled automatically according to the temperature setting.
2. Press the TEMP button to set the desired temperature.
✽ NOTICE
- Mode selection button
- Front windshield defrost button
- Fan speed control button
The selected function will be controlled manually while other functions operate automatically.
✽ NOTICE
Never place anything near the sensor to ensure better control of the heating and cooling system.
Components and Components Location
Components Location
1. Fuel tank2. Fuel pump3. Sub fuel sender4. Fuel filter5. Over Pressure Valve (OPV)6. Canister7. Fuel tank air filter8. Fuel Pressure Sensor (FPS)9. Fuel Level Sensor ( ...
Description and Operation
Description of ESP
Optimum driving safety now has a name: ESP, the Electronic Stability Program.
ESP recognizes critical driving conditions, such as panic
reactions in dangerous situations, a ...
Fuel Filler Door Open Switch Repair procedures
Inspection
1.
Remove the front door trim panel.
(Refer to BD group - "Front door")
2.
Check the switch (A) for continuity between the terminals.
3.
If the continuity is not as specified, ...