>
Replacement |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the heater and blower assembly.
(Refer to Heater - "Heater Unit") |
3. |
Separate the blower unit (A) from the heater unit (B) after loosening the screws. |
4. |
Install in the reverse order of removal. |
Trunk Lid Trim Repair procedures
Replacement
•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply prote ...
TPMS (Tire Pressure Monitoring System) malfunction indicator
The TPMS malfunction indicator will illuminate after it blinks for approximately
one minute when there is a problem with the Tire Pressure Monitoring System.
Have the system checked by an authori ...
Rear Seat Assembly Repair procedures
Replacement
[Rear Seat Cushion Assembly]
1.
Pull it up and remove the rear seat cushion assembly (A).
2.
Install in the reverse order of removal.
•
Make sure the co ...