>
Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Disconnect the connector from the front bumper cover.
(Refer to Body - "Front Bumper Cover") |
3. |
Pull out the sensor (A) by opening the sensor holder out. |
4. |
Disconnect the connector from the sensor. |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Disconnect the connector from the rear bumper cover.
(Refer to Body - "Rear Bumper Cover") |
3. |
Pull out the sensor (A) by opening the sensor holder out. |
4. |
Disconnect the connector from the sensor. |
Installation |
1. |
Install the senosr after connecting the connector. |
2. |
Connect the negative (-) battery terminal. |
1. |
Install the senosr after connecting the connector. |
2. |
Connect the negative (-) battery terminal. |
Front Strut Assembly Components and Components Location
Components
1. Insulator cap2. Insulator assembly3. Spring upper pad4. Dust cover 5. Bump stopper6. Coil spring7. Spring lower pad8. Shock absorber
...
4&OD Clutch Control Solenoid Valve Description and Operation
Description
4&OD Clutch control solenoid valve is attached to the
valve body. This variable force solenoid valve directly controls the
hydraulic pressure inside the 4&OD Clutch. ...
Front Seat Assembly Components and Components Location
Component Location
1. Front seat assembly
...