>
Removal |
In case of bad quality or poor focus, be sure to check the camera lense surface condition and foreign materials. |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the front bumper cover.
(Refer to Body - "Front Bumper Cover") |
3. |
Remove the pantocscpic camera after loosening the mounting screws and connector (A). |
1. |
Remove the rear pantoscopic camera of Multi-view Camera system.
(Refer to "Front Back View Camera System") |
Installation |
1. |
Install the front pantoscopic camera. |
2. |
Install the front bumper cover. |
1. |
Install the rear pantoscopic camera.
(Refer to "Front Back View Camera System") |
Tire and loading information label
The label located on the driver's door sill gives the original tire size, cold
tire pressures recommended for your vehicle, the number of people that can be in
your vehicle and vehicle cap ...
Transmission Control Module (TCM) Description and Operation
Description
Transmission Control Module (TCM) is the automatic
Transmission's brain. The module receives and processes signals from
various sensors and implements a wide range of Transmission ...
SRS Control Module (SRSCM) Repair procedures
Removal
1.
Turn the engine OFF.
2.
Disconnect the battery negative cable and wait for at least three minutes before beginning work.
3.
Remove the floor console assembly.
(Refer to Body - ...