>
Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the crash pad lower pannel.
(Refer to Body - "Crash Pad Lower Pannel") |
3. |
Remove the Multi-view Camera unit (A) after disconnecting the connector and nuts (B). |
Installation |
1. |
Install the Multi-view Camera unit. |
2. |
Install the glove box housing and glove box. |
3. |
Connect the negative (-) battery terminal. |
Fuel Tank Pressure Sensor (FTPS) Specifications
Specification
Pressure [kPa (kgf/cmx, in H2O)Output Voltage (V)-6.67 (-0.068, -26.8)0.502.5+6.67 (0.068, 26.8)4.5
...
Climate Seat Unit Description and Operation
Description
Comparing with the seat heat function by the existing thermic
rays, Climate Control Seat functions the heating,cooling, dehumidifying
by using TED.
It inhales the indoor air throug ...
Rear Glass Defogger Printed Heater Repair procedures
Inspection
Wrap tin foil around the end of the voltmeter test lead to
prevent damaging the heater line. Apply finger pressure on the tin foil,
moving the tin foil along th ...