>
Circuit Diagram |
1. |
Camera input
|
2. |
Multi-view Camera image output
The Multi-view Camera unit carries out distortion
compensation and video merging on the image from 4 cameras installed
around the vehicle, indicates steering interlocking guidelines and
others, and outputs them in analog. |
3. |
Multi-view Camera switch
When the switch is ON, this is used as a control input signal that operates the front view mode. |
4. |
Ignition input
The Multi-view Camera unit outputs images only when IGN2 ON.
When IGN2 OFF , it is an Multi-view Camera OFF state, and limits image
outputting.
Multi-view Camera unit uses signals inputted through IGN pin or M_CAN communication to determine whether IGN2 is ON or OFF. |
5. |
Output switch indicator lamp
Multi-view Camera units output power through PWM waves from
the LED located in the Multi-view Camera switch to show the user whether
the switch has been pressed. |
6. |
Input chassis CAN (C_CAN)
The Multi-view Camera unit uses C_CAN to receive information
about the vehicle's condition and to decide whether to carry out main
Multi-view Camera operations. |
7. |
Multimedia CAN input/output (M_CAN)
The Multi-view Camera unit uses the AVN, which displays
images from the Multi-view Camera, and M_CAN to communicate to send and
receive the following information.
|
Power Windows
The Engine Start/Stop Button must be in the ON position to be able to raise or
lower the windows.
Each door has a Power Window switch to control that door's window. The driver
has a Power Win ...
Front Seat Back Cover Repair procedures
Replacement
•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply prote ...
Description and Operation
Description
Power Trunk Lid (PTL) System : It is automatically opens and
closes a vehicle’s trunk lid and cinches the latch with the press of a
button, and also can be easily operated, using an ...