>
Removal |
1. |
Remove the head lamp leveling unit linkage (A) from trailing arm. |
2. |
Loosen the mounting bolts (3EA) of automatic head lamp leveling unit assembly.
|
3. |
Remove the head lamp leveling unit connector. |
4. |
Remove the head lamp leveling unit assembly after removing the screws (2EA). |
Installation |
1. |
Connect the connector and install the head lamp leveling unit. |
2. |
Install the head lamp leveling unit linkage.
|
Inspection |
1. |
Ignition "ON". |
2. |
Turn on the head lamp switch. |
3. |
Check for operation. If the aim of the head lamps changes smoothly when the head lamp leveling switch is turned. |
4. |
If the operation does not work well, inspect the connector and terminals to be sure they are all making good contact.
If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
If the terminals look OK, go to step 5. |
5. |
Substitute with a known-good head lamp assembly and check for proper operation. |
Components and Components Location
Component Location
1 . Front PAS sensor (4EA)2 . Rear PAS sensor (4EA)3. Indicator (warning information displayed on LCD)4 . Parking Assist System (PAS) switch5 . Body Control Module (BCM)6. Clus ...
Panic Button
Press the Panic button (4) for more than one second. The horn sounds and hazard
warning lights flash for about 30 seconds.
To cancel the panic mode, press any button on the Smart Key. ...
Specifications
Specifications
Electrical System
Item SpecificationsSlide, Front/Rear HeightRecline/Cushion/HeadrestMain Power SeatPosition SensorOperating VoltageDC 3.8V ~ 24VConsumption CurrentTyp 3mA , Max 7mA ...