>
Heated Oxygen Sensor (HO2S) Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the HO2S connector.
3.
Measure resistance between the HO2S terminals 3 and 4.
4.
Check that the resistance is within the speci ...
Front Door Outside Handle Repair procedures
Replacement
1.
Remove the hole plug (B).
2.
After loosening the mounting bolt, then remove the front door outside handle cover (A).
Tightening torque :
6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ...
Schematic Diagrams
System Block Diagram
Power Seat Memory Unit (For Driver)
Relax Power Seat Unit (For Passenger & Rear)
Circuit Diagram (1)
Power Seat Module - PSM (For Driver)
Circuit Diagram (2)
Rel ...