>
Inspection |
Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the rain sensor.
(Refer to Windshield Wiper/Washer - "Rain Sensor") |
Installation |
1. |
Install the rain sensor. |
2. |
Connect the negative (-) battery terminal. |
BlueLink Control Switch Components and Components Location
Components
...
Starter Repair procedures
Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Disconnect the starter cable (A) from the B terminal on the solenoid, and the connector (B) from the S ter ...
Repair procedures
Inspection
Tolerance Compensation
Tolerance compensation compensates for the error margins of
Multi-view video that occur due to the installation tolerance when the
four cameras that comprise ...