Hyundai Equus: Front Fog Lamps Repair procedures
Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Body Electrical System / Lighting System / Front Fog Lamps Repair procedures
| Removal |
| 1. |
Disconnect the negative (-) battery terminal. |
| 2. |
Remove the front bumper.
(Refer to Body - "Bumper") |
| 3. |
Remove the front fog lamp assembly (A) after loosening screws. |
| Installation |
| 1. |
Install the front fog lamp assembly. |
| 2. |
Connect the front fog lamp connector. |
| 3. |
Install the front bumper cover. |
Rheostat Repair procedures
Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Remove the lower crash panel and then disconnect the rheostat connector.
3.
Check for intensity of new rheostat switch. If th ...
High Mounted stop lamp Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the rear package trim (A).
(Refer to Body - "Interior trim")
3.
Remove the high mounted stop lamp (A) after removing sc ...
See also:
Operating Door Locks From Inside the Vehicle
With the Door Lock Button :
To unlock a door, push the door lock button (1) to the “Unlock” position.
The red mark (2) on the door lock button will be visible.
To lock a door, push the door ...
Lane Departure Warning System (LDWS) Unit Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the LDWS unit cover (A).
3.
Remove the LDWS unit connector (A).
4.
Remove the front side of roof trim to remove the L ...
Smart Cruise Control Unit Description and Operation
Description
The smart cruise control unit is installed on the front
center of the chassis. A radar sensor is embedded in the front section
of the unit. This sensor detects vehicles and objects ...
Categories
Hyundai Equus Manuals
