>
Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the overhead console lamp (A) after loosening the overhead console lamp screw(2EA). |
3. |
Disconnect the sunroof switch connector (A) and lamp connector (B). |
Installation |
1. |
Connect the sunroof switch connector and lamp connector. |
2. |
Install the overhead console lamp. |
Photo Sensor Repair procedures
Inspection
1.
Turn the ignition switch ON.
2.
Connect the GDS.
3.
Emit intensive light toward the photo sensor using a lamp, and check the output voltage change.
4.
The voltage will ri ...
Rail Pressure Sensor (RPS) Specifications
Specification
...
Troubleshooting
Troubleshooting
•
The battery must be in good condition and fully charged for this troubleshooting.
...