>
Inspection |
Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the rear package tray trim (A) after removing the rear seat.
(Refer to Body - "Rear Package Tray Trim") |
3. |
Remove the rear curtain (A) after disconnecting the connector and rear curtain mounting nuts. |
4. |
Remove the rear curtain motor (A) after loosening the screws. |
Installation |
1. |
Install the rear curtain after connecting the connector. |
2. |
Install the rear package trim and rear seat. |
3. |
Connect the negative battery terminal. |
Rear Seat Cushion Cover Components and Components Location
Component Location
1. Rear seat cushion cover [LH]2. Rear seat cushion cover [RH]
...
Radiator Components and Components Location
Components
1. Cooling fan assembly2. Radiator lower hose3. Radiator upper hose4. Coolant reservoir tank5. Radiator6. Mounting insulator7. Mounting bracket
...
Windshield wipers
Operates as follows when the ignition switch is turned ON.
MIST :
For a single wiping cycle, push the lever upward and release it with the lever
in the OFF position. The wipers will operate conti ...