>
Removal |
1. |
Remove the steering column upper and lower shrouds after loosening screws. |
2. |
Disconnect the multifunction switch connector (A). |
3. |
Remove the wiper & washer switch (A) by pushing the lock pin.
|
4. |
Remove the clock spring.
(Refer to Restraint - "Driver Airbag (DAB) Module and Clock Spring") |
5. |
Loosen the screws (2EA) from the multifunction switch assembly (A). |
Installation |
1. |
Install the multifunction switch after connecting the connector. |
2. |
Install the clock spring.
|
3. |
Install the steering column upper and lower shrouds. |
4. |
Install the steering wheel.
|
Inspection |
1. |
Check IPM input/output specification of windshield
wiper/washer switch using the GDS. If the specification is abnormal,
replace the windshield wiper/washer switch module. |
2. |
Select option "Input/output monitoring". |
Repair procedures
Replacement
•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply prote ...
Outside Rear View Mirror Repair procedures
Replacement
•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply prote ...
Front LCD monitor Repair procedures
Removal
Take care not to scratch the crash pad and related parts.
1.
Disconnect the negative (-) battery terminal.
2.
Remove the center fascia upper panel.
(Refer to ...