>
Removal |
|
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the left trunk trim in the trunk. (Refer to the Body group - "Trunk") |
3. |
Remove the power trunk connecting rod (B) after removing the push rod pin (A).
|
4. |
Remove the power trunk module & drive unit (A) after removing the bolts, nut and connector. |
Installation |
1. |
Install the power trunk module & drive unit.
|
2. |
Install the push rod to the ball joint. |
3. |
Connect the connector (18P). |
4. |
Install the left trunk trim. |
5. |
Connect the negative (-) battery terminal and check the power trunk module correctly.
|
Components and Components Location
Component
...
Rear Hub - Carrier Components and Components Location
Component
1. Rear hub assembly2. Dust cover3. Rear knuckle4. Rear brake disc
...
Electric Parking Brake (EPB) Repair procedures
Removal
1.
Release the parking brake by pushing the EPB switch.
2.
Turn ignition switch off and disconnect the battery (-) cable from the battery.
3.
Remove the canister service cover in ...