>
Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Using a screwdriver or plastic panel remover, remove the cluster fascia upper panel (A). |
3. |
Using a screwdriver or plastic panel remover, remove the center fascia upper panel (A). |
4. |
Disconnect the heater control unit connector (A), clock and SSB connector (B). |
5. |
After loosening the screws, remove the heater control unit (A) from the center fascia upper panel. |
Installation |
1. |
Install the heater control unit to the center fascia upper panel. |
2. |
Install the center fascia upper panel. |
3. |
Install the cluster fascia upper panel. |
Inspection |
1. |
The rear window defogger switch inputs can be checked using the GDS. |
2. |
To check the input value of rear window defogger switch, select option "IPM". |
3. |
Select option "Input/output monitoring". |
4. |
To check the input value of rear window defogger switch in force mode, select option "ACTUATION TEST". |
Reprogramming a single HomeLink® button
To program a device to HomeLink® using a HomeLink® button previously trained,
follow these steps:
1. Press and hold the desired HomeLink® button. DO NOT release the button.
2. The indicator light ...
LCD Display Control
The LCD display modes can be changed by using the control buttons on the steering
wheel.
1) button : Changing LCD modes
(right to left), or returning to previous position
(2) but ...
Description and Operation
Description
Control Function
This system supports 3 kinds of main function.(Front/Rear
video display function, Expected trace of wheels display function,
Parking guide function)
The Front/Rea ...