>
Inspection |
1. |
Remove the cowl top cover (A).
(Refer to Body - "Wiper") |
2. |
Disconnect the windshield deicer connector (A) from the wiper motor linkage. |
3. |
Check for continuity between the terminals of deicer lines. |
4. |
Turn the ignition switch ON and the windshield deicer switch
ON, then measure the voltage between the terminals of harness side
deicer connector.
|
Seats
...
Rear Door Inside Handle Repair procedures
Replacement
1.
Remove the rear door trim.
(Refer to Rear Door - "Rear Door Trim")
2.
Disconnect the rear door inside handle lamp connector (A).
3.
After loosening the mounting screws, th ...
Specifications
Specification
Ignition System
Ignition Coil
ItemSpecification Primary Coil Resistance (x)0.62 ± 10% [20°C (68°F)]Secondary Coil Resistance (kx)7.0 ± 15% [20°C (68°F)]
Spark Plug
ItemS ...