>
Inspection |
1. |
When checking the driver power window switch, select a vehicle type and "IPM" menu. |
2. |
Select "DDM (Driver Door Module)". |
3. |
Select option "Input/Output monitoring". |
4. |
To check the input value of power window switch in force mode, select option "ACTUATION TEST". |
1. |
When checking the assist power window switch, select a vehicle type and "IPM" menu. |
2. |
Select "ADM (Assist Door Module)". |
3. |
Select option "Input/Output monitoring". |
4. |
To check the input value of power window switch in force mode, select option "ACTUATION TEST". |
Advanced vehicle safety management (AVSM) (If equipped)
AVSM detects the distance from the vehicle ahead with the sensor, to warn you
before collision and protect you in certain hazardous situations by using warning
message, warning sound and seat belt ...
Blower Unit Repair procedures
Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the heater and blower assembly.
(Refer to Heater - "Heater Unit")
3.
Separate the blower unit (A) from the heater un ...
Crach Pad Center Panel Components and Components Location
Component Location
1. Crash pad center panel
...