>
Inspection |
1. |
Remove (-) negative battery terminal. |
2. |
Remove the front door trim.
(Refer to Body - "Front Door") |
3. |
Disconnect the motor connector from the motor. |
4. |
Connect the motor terminals directly to battery voltage (12V)
and check that the motor operates smoothly. Next, reverse the polarity
and check that the motor operates smoothly in the reverse direction. If
the operation is abnormal, replace the motor. |
1. |
Remove (-) negative battery terminal. |
2. |
Remove the rear door trim.
(Refer to Body - "Rear Door") |
3. |
Disconnect the motor connector from the motor. |
4. |
Connect the motor terminals directly to battery voltage (12V)
and check that the motor operates smoothly. Next, reverse the polarity
and check that the motor operates smoothly in the reverse direction. If
the operation is abnormal, replace the motor.
[Satety Window] |
Recommended lubricants and capacities
To help achieve proper engine and powertrain performance and durability, use
only lubricants of the proper quality.
The correct lubricants also help promote engine efficiency that results in improv ...
Filter inspection
The climate control air filter should be replaced every 15,000 miles (24,000
km). If the vehicle is operated in severely air-polluted cities or on dusty rough
roads for a long period, it should be ...
Components and Components Location
Components Location
1. Fuel tank2. Fuel pump3. Sub fuel sender4. Fuel filter5. Over Pressure Valve (OPV)6. Canister7. Fuel tank air filter8. Fuel Pressure Sensor (FPS)9. Fuel Level Sensor ( ...