>
Inspection |
1. |
It will be able to diagnose defects of DDM/ADM with GDS
quickly. GDS can operates actuator forcefully, input/output value
monitoring and self diagnosis. |
2. |
Select model and "IPM". |
3. |
Select the "DDM (Power window main)" to check. |
4. |
Select "Input/output monitoring", if you will check current
data of power door lock system. It provides input/output status of
DDM/ADM. |
5. |
If you will check the power door lock operation forcefully, select "Actuation test". |
6. |
To check the DTC of the DDM/AMD module, select "Diagnostic trouble codes" |
Mic Repair procedures
Removal
1.
Remove the hands free mic (A) from the roof trim.
Installation
1.
Install the hands free mic after connecting the mic connector.
Inspection
1.
Remove the handsfree mic (A) aft ...
Child restraint system
Children under age 13 must always ride in the rear seats and must always be properly
restrained to minimize the risk of injury in an accident, sudden stop or sudden
maneuver. According to accident ...
Auto Defogging Sensor Description and Operation
Description
The auto defogging sensor is installed on the front window
glass. The sensor judges and sends signal if moisture occurs to blow out
wind for defogging. The air conditioner control m ...