>
Inspection |
1. |
The SJB can be diagnosed by using the GDS. The SJB
communicates with the GDS which then displays inputs and outputs along
with codes. |
2. |
To diagnose the SJB function, select the vehicle model, BCM and SJB. |
3. |
To consult the present input/out value of SJB, "Current DATA". It provides information of SJB input/output conditions. |
4. |
To perform functional test on SJB outputs, select "Actuation Test" |
Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad Lower Panel") |
3. |
Disconnect the smart junction box (SJB) connectors and nuts. |
4. |
Disconnect the connector (A) in the back side of the smart junction box. |
Installation |
1. |
Connect the connectors and receiver antenna cable on the smart junction box. |
2. |
Install the smart junction box module. |
3. |
Install the crash pad lower panel. |
4. |
Connect the negative (-) battery terminal. |
Auto Head lamp leveling Unit Description and Operation
Description
According to driving environment and loading state of
vehicle, head lamp lighting direction is changed to keep the driver's
visibility range and to protect the driver's vision from ...
Schematic Diagrams
Circuit Diagram
...
Smart Cruise Control Unit Repair procedures
Removal
1.
Remove the bumper cover.
(Refer to Body - "Front Bumper Cover")
2.
Disconnect the smart cruise control unit connector (A).
3.
Loosen the nuts (B) and then remove the smar ...