>
Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the rear seat back.
(Refer to Body - "Rear Seat Back Cover") |
3. |
Remove the bladder & ECU/ valve assembly (A) after loosening the mounting bolts from the rear seat back. |
Installation |
1. |
Install the bladder & ECU/ valve assembly. |
2. |
Remove the rear seat back.
|
Roof Trim Assembly Components and Components Location
Component Location
1. Roof Trim Assembly
...
Smart Cruise Control Unit Repair procedures
Removal
1.
Remove the bumper cover.
(Refer to Body - "Front Bumper Cover")
2.
Disconnect the smart cruise control unit connector (A).
3.
Loosen the nuts (B) and then remove the smar ...
Driver Door Module (DDM) Components and Components Location
Component
...