>
Removal |
1. |
Disconnect the negatiev (-) battery terminal. |
2. |
Remove the glove box housing.
(Refer to Body - "Glove Box Housing") |
3. |
Remove the RF receiver (B) after disconnecting the connector (A) and loosening the mounting bolt. |
Installation |
1. |
Install the RF receiver after connecting the connector. |
2. |
Install the glove box housning. |
3. |
Connect the negative (-) battery terminal. |
Camshaft Position Sensor (CMPS) Description and Operation
Description
Camshaft Position Sensor (CMPS) is a hall sensor and detects the camshaft position by using a hall element.
It is related with Crankshaft Position Sensor (CKPS) and
detects the pisto ...
Inner panel fuse replacement
1. Turn the ignition switch and all other switches off.
2. Open the fuse panel cover.
3. Pull the suspected fuse straight out. Use the removal tool provided in the
driver’s side panel or the f ...
Ignition Coil Repair procedures
Removal
1.
Disconnect the battery nagative terminal.
2.
Remove the engine cover.
3.
Disconnect the LH/RH ignition coil connectors (A).
4.
Remove the LH/RH ignition coil (A).
&n ...